Done an event with 360 photo booth yesterday but client wants to change the music today? Use the hotfolder in 360 software if you need to render a lot of old videos from the GoPro or videos shot in 120/240 fps with some other camera. Check the video with a small video explanation about it.
Load fast settings of effects in a spinner app by "load" button. We've used the same song and the same archive video to get 5 different results. Try to use them on your next event or create your own combinations. Click to download the preset 1 Click to download the preset 2 Click to download the preset 3 Click to download the preset 4 Click to download the preset 5
1.Check your archive video from the camera. Spinner software saves it in C/Dzentech/Spinnervfx/archive It's the original video from the camera withoyt overlays, slowmo and etc. If the video looks pixelated, then most probably you need to change settings in a GoPro. Turn on ProTune and set the maximum ISO to 800. If you see that the video is toodark, then we recommend adding some video light or to play with color correction settings of the software. 2. If your archive video lo
In most of cases it's enought just to add a little bit of contrast in color correction tab of spinner 360 software. But in some cases when you make videos outdoors without an additional light, then you may also need advanced settings of the program. For example, check this archive video from the camera. It's dark and not interesting. So I've made a screenshot of one of the frames and opened it in a photoshop. Then you need to make a photoshop curve. After that you canplay wit
Usually the most common problem that when you start Spinner 360 photo booth software you loose your connection to the internet. It happens because auto connection is turned on (gopro tab) and the software tries to connect to the GoPro. And it doesn't matter if it's turned on or off. It will still try to connect to it by Wi-Fi. You may turn off auto connection and to connect to your wi-fi. In case if you want to have GoPro +wi-fi connected at a time, then you may use: 1.Wi-fi
Check list for outdoors shooting with Spinner 360 photo video booth: Uninterruptible Power Supply. Check this one, for example - Anker PowerHouse II 400 Platform Laptop (or android phone) GoPro + battery for it + power bank Light Remote GoPro app installed on your phone For events: souce of internet + sharing station/qr code Uninterruptible Power Supplies can be diferent. It will be needed fo charging the platform and a laptop. With our small office UPS platform spins about
Triangle light doesn't have it's own battery inside, so you don't need to charge it. On event it's possible just to change the power bank and to continiue your event. Main features of the light: Super light (about 1,3 lbs) 2 modes: can turn off when it's not spinning and can be turned on all the time. You can charge the GoPro or phone using USB in it Can be used with any platform Charged from the power bank. You can change the agle of it easily. Check the video of our Triangl
Have 360 photo video booth from DzenTech but never made vertical videos? Add it as an additional feature on your next event. Guest will love it. There are 2 versions of how you may record videos by GoPro: from hands and using a rack. Check an example of video done by Dzen Tech Spinner 360 software for 360 photo booth. To make videos like this you need: 1. GoPro 7 Black (you can also use 5, 6, 8 Black). 2. DzenTech Spinner 360 software for 360 photo booth 3. Windows based lap
Hello. For sharing using QR code you're gonna need a gmail account with google drive. But it can also be done using a dropbox, yandex drive and etc. Create a folder for your event in google drive. I've named it 16.02 . Then in a right top corner choose "Get drive for desktop" 2. Choose download for Windows 3.Then in a spinner folder-render tab choose the folder where to save files. Google drive is a G drive. So in my case it was G:/Мой диск/16.02 (in your case it will be smt
Hello. If you see the red mistake like this, then it means that your bank blocks the payment. Usually it's automatic for international payments. To fix it you need to call to the bank and to confirm the payment. Also please check that you've texted all information correctly and have enough balance on our card. If the screen looks like this, then the payment is succesful. The license for the software will be sent in 24 hours after the payment. If you buy the hardware, then we'
Spinner 360 guide What's new in the program since 25 December 2020: - effects were changed - choma key - hot folder - possibility to copy files to any folder - reverse makes a full loop - test function was changed a little bit - Some buttons positions were changed Video instruction: Small video introduction: Most common questions: 1. How to change the length of the video? Move vfx length slider (right - to increast the duration). Also it's possibe to change the number of effe
The first thing that you do is connecting 2 cables inside of platform. Thread 2 screws through the holes and twist them for connecting the stick. Wires should be under the platform. Don't forget to plug platfor to the socket. Use power bank for charging GoPro. We connect it with ties. You can set any angle of stick that you want(we usually use 2 or 3 hole). Please use 2 special screws for it that come in a set. You can change the height of the stick. Minimum lenght is 55 cm.
Main featutes of Sender program: - html editor - The ability to use the gallery from any device connected to the same local network - Support for sending to email via mail server or Sendgrid service - Submission queue (to prevent marking as spam and re-sending in case of errors / lack of Internet) - Automatic creation of previews for the gallery from mp4 files You can download it here https://www.ksuse.ru/ksusesender?lang=en Video instruction: Video about creation of the sepa
Here you can see how to change platform power connection cable. This may take about 10-15 minutes. What you need: Power extension cable. Wire cutters. Flat screwdriver. Zip ties. Measuring tool. Prepare new cable: See photos below (from left to right): Check what we need to have. Measure out 25cm from the end of the cable. Cut it! Measure ot 4cm from cuted end of the cable. Strip the outer insulation. Strip the insulation on each 3 cables (about 10mm). Now we need to remove o
Hello! In this guide we will show you how to controll "DZEN TECH Spinner360" Platform with android phone. This might be helpful if you need to Start\Stop or change speed of platform without laptop and original app connection. What you need for this: Any android phone (we tested it on Xiaomi MI A3) USB-OTG adapter for your android phone (check which USB type on your phone). Serial USB Terminal app for android: https://play.google.com/store/apps/details?id=de.kai_morich.serial_
THIS ARTICLE WILL BE UPDATED SOON. Attention: this software works only on PC with activated "Spinner360" license. The main window of the app looks like this: How to use this app: 1) Click on "Load File" buttons, and choose which video or image you want to use for a background. After uploading new content you will see estimated camera record time which fits on rendered background. If you use image as input file - creator app will make video which will fits on any record time.
Посмотрите на видео инструкцию по работе с зеленым фоном и Спиннером 360. Ссылка на наш зеленый фон Ссылка на источники света Ссылка на пример фото струбцины Что потребуется для крепления света к струбцине Chapters: 0:00 Фон 0:38 Свет 1:07 Настройка GoPro 1:38 Пример хорошего и плохого ролика 1:48 Настройки в программе Спиннер 360 3:05 Цветокоррекция
Check our video instructin about it: Link for our enclosure Link for YangnuoYN 360 iii (our light) Link for the clamp Thing to connect light to the clamp Chapters: 0:00 Enclosure. 0:35 Light 1:11 Camera settings 1:45 Example of good and bad achive video 1:53 Spinner program settings 3:14 Color correction