guides and articles about photo booths.

360 photo booth platform setup

Simply video guide about how to set it all up)

The first thing that you do is connecting the power cable inside the platform. If you have the Bluetooth controller installed (it's installed in all platforms bought after July 2022), then the second cable is optional. You can connect it or to use the Bluetooth.

Thread 2 screws through the holes and twist them for connecting the stick.

Wires should be under the platform.

Do not forget to plug the platform into a power outlet or power bank.

Use power bank for charging GoPro.

We connect it with zip ties in the bottom of the stick.

You can set any angle of stick that you want(we usually use 2 or 3 hole). Please use 2 special screws for it that come in a set.

You can change the height of the stick.

Minimum length is 55 cm. Maximum is 153 cm. It's enough for children and adults.

You need to pull the little door that closes the connectors for taking it off.

There shouldn't be the battery inside the camera. Connect it by cable to the power bank.

And then to screw the camera on the top of the stick.

If you have the triangle light, then it will look like on the picture.

You can also change the angle of the triangle light and camera.

You need to connect 1 USB to your laptop. (or just connect the platform by Bluetooth ) Spinner program can work without internet but you will need it for sharing, so use a Wi-Fi adapter to stay connected to the camera and Wi-Fi the same time.

This is a remote controller for spinning and recording.

Just plug USB to the laptop.

Right button is for starting spinning and left button for starting recording. (or use only 1 right button if auto start turned on in spinner app-platform tab)

It stops automatically.